High pressure pumps: A “high pressure” application means that the static overpressure test of the pump is above 75bar. In this case, pressure is the most important factor for the pump design. The construction of the machine is then carried out in accordance with the Pressure Equipment Directive (2014/68/EU). Find out our range of pumps…
Pumps for hot liquids: Many industries use high temperature liquids for their processes. These liquids can be grouped in two categories: Hot liquids between 100°C and 160°C Very hot liquids between 160°C and 500°C Find out our range of industrial pumps related to hot liquids pumping: PUMPING RESTRICTIONS FOR DANGEROUS LIQUIDS: Pumping high temperature liquids…
Pump for suction lift configurations: Some applications require to use pumps for suction lift configurations: Sea water pumping Recirculation of industrial effluents Sewage pumping Find out our range of pumps for suction lift: PUMPING RESTRICTIONS FOR SUCTION LIFT:The centrifugal pump is installed above the level of the suction tank. A partial vacuum must be created…
Centrifugal compressor for gaz or supercritical liquids: In some industrial processes, it is necessary to convey gas or liquids in supercritical phase. In these cases, the fluid requires special pumping constraints. Find out our range of centrifugal compressor for gas or supercritical liquids: PUMPING RESTRICTIONS:Liquids in supercritical phase or gas cannot be pumped by classical liquid…
Canned motor pump for high gas content liquids: During the transfer from the tank to the suction flange, the pumped liquid can vaporise due to pressure losses in the suction pipe or external heating on the pipe. Find out our range of pumps related to high gas content liquids: PUMPING RESTRICTIONS:Pumping gas causes irreversible damage…
